Self-regulating heating cables

Some without heating and self-regulating capacity (Self regulating heat cables) were first introduced in 1971 and since then have taken their place as a common and most preferred electric heaters in the world.

The special ability of the heating cables is to change their heating power according to the change in ambient temperature. The heating power of the cables is changed automatically with the help of a special chemical alloy that surrounds their conductive core. As the temperature in the heating cable environment decreases, the alloy "expands" thus allowing more electrical connections and a higher power output which in turn increases heat output. As the temperature in the cable environment rises, there is a reverse process of a minority of electrical links and therefore lower power and heat production is reduced .accordingly

.In addition, with its special layer structure the cable is triangulated: mechanical, chemical and electrical

Self-regulating heating cables are very common and have a very wide range of uses throughout the .industry: container heating, piping heating, temperature saving

Advantages of self-regulating heating cables

• Heating cables can be "cut in the field", ie there is no need to accurately measure the length of the piping and .equipment in advance, the heating cables can be adapted to how the piping is done in the field
• Allows flexibility and making changes to the piping even at the last minute
• (Save energy (electricity
• The cable power can be changed in each section along the pipe according to the insulation quality on the line
• Winding the cable on itself will not cause damage
• Accuracy of working temperature throughout the line
• With the right choice of heating cables and process conditions, sometimes additional control measures can be completely dispensed with

Why choose heating tapes in Rami Raz?

We at "Rami Raz Engineering 2005 (Ltd.)" are known for our ability to provide a comprehensive solution for any heating project that we require at 4 different levels:

1. Consulting – We will check and advise on the optimal type of heating required by looking at plans (both in the planning projects and existing facilities) and reaching the area to estimate the project needs
2. Planning: After examining the piping, containers, equipment, process conditions and field conditions we will approach the design work, the planning will be reviewed and approved by the customer, the customer's comments will be taken into account and the planning will be updated
   until an optimal result is reached
3. Execution: Our experienced installer team (with more than 20 (!) Years of experience in installing electric heating systems) will be on site and will be able to work as quickly as possible and with maximum professionalism, to allow the facility to return to full operation quickly Quality
4. control: We will perform all the tests required to ensure that the entire system works as expected and provides optimal results and will continue to support the system throughout its life

We can manufacture self-regulating heating cables within the following ranges:

volts 12-1000

Resistant to temperatures up to 300 degrees Celsius

Suppliers of up to 120 W / m

All included heating films provided with an external poly- or fluopolymer coating. Cables can be obtained .without external coating – please see the data in the catalogs or call us for information and advice

Self-regulating heating cable family